Medico-Legal Journal is dedicated to promoting Medico-Legal knowledge in all its aspects. It provides an official record of the proceedings of the Medico-Legal Society. The journal seeks to further the society’s aim to expand knowledge of medico-legal matters by commissioning articles on topics from across this diverse field. The journal publishes a wide range of high-quality original articles, commentaries, case studies, letters, reviews and obituaries which consider contemporary and relevant medico-legal issues that are sent in from around the world.
This journal is a member of the Committee on Publication Ethics (COPE)
Medico-Legal Journal aims to promote the knowledge and discussion of a wide range of topical medico-legal issues. It is unique in publishing the superb lectures and discussions that regularly take place at the Medico-Legal Society’s meetings as well as thoughtful Editorials and a host of excellent original articles from around the world and the UK.
Manuscript Submission Guidelines: Medico-Legal Journal
This Journal is a member of the Committee on Publication Ethics.
Only manuscripts of sufficient quality that meet the aims and scope of Medico-Legal Journal will be reviewed.
There are no fees payable to submit or publish in this journal.
As part of the submission process you will be required to warrant that you are submitting your original work, that you have the rights in the work, and that you have obtained and can supply all necessary permissions for the reproduction of any copyright works not owned by you, that you are submitting the work for first publication in the Journal and that it is not being considered for publication elsewhere and has not already been published elsewhere. Please see our guidelines on prior publication and note that Medico-Legal Journal may accept submissions of papers that have been posted on pre-print servers; please alert the Editorial Office when submitting (contact details are at the end of these guidelines) and include the DOI for the preprint in the designated field in the manuscript submission system. Authors should not post an updated version of their paper on the preprint server while it is being peer reviewed for possible publication in the journal. If the article is accepted for publication, the author may re-use their work according to the journal's author archiving policy.
Authors are encouraged to consider whether images are necessary to the paper's understanding before submitting their manuscript.
- What do we publish?
1.1 Aims & Scope
1.2 Article types
1.3 Writing your paper
- Editorial policies
2.1 Peer review policy
2.5 Declaration of conflicting interests
2.6 Research ethics and patient consent
2.7 Rate Data
- Publishing policies
3.1 Publication ethics
3.2 Contributor's publishing agreement
3.3 Open access and author archiving
- Preparing your manuscript
4.2 Artwork, figures and other graphics
4.3 Supplemental material
4.4 Reference style
4.5 Journal Layout
4.6 Statistical Guidelines
4.7 English language editing services
- Submitting your manuscript
5.1 Information required for completing your submission
- On acceptance and publication
6.1 SAGE Production
6.2 Online First publication
6.3 Access to your published article
6.4 Promoting your article
- Further information
Before submitting your manuscript to Medico-Legal Journal, please ensure you have read the Aims & Scope.
The Journal publishes a wide range of high quality original articles, commentaries, case studies, letters, reviews and obituaries which consider contemporary and relevant medico-legal issues that are sent in from around the world. Once approved texts are published first on line and later in the quarterly paper issue. Society members and Journal subscribers can view all of these as well as 90 years of past publications. The 2020 Part 2 focuses exclusively on COVID-19 pandemic.
All article types require a cover page that contains:
- Finalised title
- All author affiliations, email addresses, postal addresses (including country, state and post code).
- Type of manuscript as detailed below.
- Submitted date
- If accepted, the date of acceptance
- Funding information
- Permission details
Papers Presented to the Society
A unique collection of contributions and speeches from eminent speakers at Society events commissioned by the Editors and Council.
The Journal seeks to further the Society's aims in education on medico-legal matters by commissioning and publishing additional articles on topics as diverse as:
- Surrogacy and the Law
- Child Pornography, characteristics of its depiction and use
- Non-whiplash soft tissue injuries following low velocity impact
- Medically assisted sucide and ethics committees in Italy
Original articles should not exceed a maximum of 2,500 words.
Texts must be original and in clear and grammatical UK English (UK setting on your computer) and as concise as possible. Input should be of Medico-Legal interest. We can offer authors advice on whether a proposed topic will be of interest but we cannot guarantee publication in advance of receipt of the manuscript.
We may need to edit your text but we will track any changes clearly for you to approve before further steps are taken.
Letters to the Editor
Letters arise usually but not exclusively from papers published in this and other scientific journals. These are usually up to 800 words.
The SAGE Author Gateway has some general advice and on how to get published, plus links to further resources.
1.3.1 Make your article discoverable
When writing up your paper, think about how you can make it discoverable. The title, keywords and abstract are key to ensuring readers find your article through search engines such as Google. For information and guidance on how best to title your article, write your abstract and select your keywords, have a look at this page on the Gateway: How to Help Readers Find Your Article Online.
SAGE does not permit the use of author-suggested (recommended) reviewers at any stage of the submission process, be that through the web-based submission system or other communication. Reviewers should be experts in their fields and should be able to provide an objective assessment of the manuscript. Our policy is that reviewers should not be assigned to a paper if:
• The reviewer is based at the same institution as any of the co-authors
• The reviewer is based at the funding body of the paper
• The author has recommended the reviewer
• The reviewer has provided a personal (e.g. Gmail/Yahoo/Hotmail) email account and an institutional email account cannot be found after performing a basic Google search (name, department and institution).
Papers should only be submitted for consideration once consent is given by all contributing authors. Those submitting papers should carefully check that all those whose work contributed to the paper are acknowledged as contributing authors.
The list of authors should include all those who can legitimately claim authorship. This is all those who:
- Made a substantial contribution to the concept or design of the work; or acquisition, analysis or interpretation of data,
- Drafted the article or revised it critically for important intellectual content,
- Approved the version to be published,
- Each author should have participated sufficiently in the work to take public responsibility for appropriate portions of the content.
Authors should meet the conditions of all of the points above. When a large, multicentre group has conducted the work, the group should identify the individuals who accept direct responsibility for the manuscript. These individuals should fully meet the criteria for authorship.
Acquisition of funding, collection of data, or general supervision of the research group alone does not constitute authorship, although all contributors who do not meet the criteria for authorship should be listed in the Acknowledgments section. Please refer to the International Committee of Medical Journal Editors (ICMJE) authorship guidelines for more information on authorship.
All contributors who do not meet the criteria for authorship should be listed in an Acknowledgements section. Examples of those who might be acknowledged include a person who provided purely technical help, or a department chair who provided only general support.
2.3.1 Third party submissions
Where an individual who is not listed as an author submits a manuscript on behalf of the author(s), a statement must be included in the Acknowledgements section of the manuscript and in the accompanying cover letter. The statements must:
- Disclose this type of editorial assistance – including the individual’s name, company and level of input
- Identify any entities that paid for this assistance
- Confirm that the listed authors have authorized the submission of their manuscript via third party and approved any statements or declarations, e.g. conflicting interests, funding, etc.
Where appropriate, SAGE reserves the right to deny consideration to manuscripts submitted by a third party rather than by the authors themselves.
2.3.2 Writing assistance
Individuals who provided writing assistance, e.g. from a specialist communications company, do not qualify as authors and so should be included in the Acknowledgements section. Authors must disclose any writing assistance – including the individual’s name, company and level of input – and identify the entity that paid for this assistance”).
It is not necessary to disclose use of language polishing services.
Medico-Legal Journal requires all authors to acknowledge their funding in a consistent fashion under a separate heading. Please visit the Funding Acknowledgements page on the SAGE Journal Author Gateway to confirm the format of the acknowledgment text in the event of funding, or state that: This research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.
It is the policy of Medico-Legal Journal to require a declaration of conflicting interests from all authors enabling a statement to be carried within the paginated pages of all published articles.
Please ensure that a ‘Declaration of Conflicting Interests’ statement is included at the end of your manuscript, after any acknowledgements and prior to the references. If no conflict exists, please state that ‘The Author(s) declare(s) that there is no conflict of interest’. For guidance on conflict of interest statements, please see the ICMJE recommendations here.
Medical research involving human subjects must be conducted according to the World Medical Association Declaration of Helsinki.
Submitted manuscripts should conform to the ICMJE Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals, and all papers reporting animal and/or human studies must state in the methods section that the relevant Ethics Committee or Institutional Review Board provided (or waived) approval. Please ensure that you have provided the full name and institution of the review committee, in addition to the approval number.
For research articles, authors are also required to state in the methods section whether participants provided informed consent and whether the consent was written or verbal.
Information on informed consent to report individual cases or case series should be included in the manuscript text. A statement is required regarding whether written informed consent for patient information and images to be published was provided by the patient(s) or a legally authorized representative. Please do not submit the patient’s actual written informed consent with your article, as this in itself breaches the patient’s confidentiality. The Journal requests that you confirm to us, in writing, that you have obtained written informed consent but the written consent itself should be held by the authors/investigators themselves, for example in a patient’s hospital record. The confirmatory letter may be uploaded with your submission as a separate file.
Please also refer to the ICMJE Recommendations for the Protection of Research Participants.
The journal is committed to facilitating openness, transparency and reproducibility of research, and has the following research data sharing policy. For more information, including FAQs please visit the SAGE Research Data policy pages.
Subject to appropriate ethical and legal considerations, authors are encouraged to:
- share your research data in a relevant public data repository
- include a data availability statement linking to your data. If it is not possible to share your data, we encourage you to consider using the statement to explain why it cannot be shared.
- cite this data in your research
Medico-Legal Journal requests all authors submitting any primary data used in their research articles to be published in the online version of the journal, or provide detailed information in their articles on how the data can be obtained. This information should include links to third-party data repositories or detailed contact information for third-party data sources. Data available only on an author-maintained website will need to be loaded onto either the journal’s platform or a third-party platform to ensure continuing accessibility. Examples of data types include but are not limited to statistical data files, replication code, text files, audio files, images, videos, appendices, and additional charts and graphs necessary to understand the original research. The editors can also grant exceptions for data that cannot legally or ethically be released. All data submitted should comply with Institutional or Ethical Review Board requirements and applicable government regulations. For further information, please contact the editorial office.
SAGE is committed to upholding the integrity of the academic record. We encourage authors to refer to the Committee on Publication Ethics’ International Standards for Authors and view the Publication Ethics page on the SAGE Author Gateway.
Medico-Legal Journal and SAGE take issues of copyright infringement, plagiarism or other breaches of best practice in publication very seriously. We seek to protect the rights of our authors and we always investigate claims of plagiarism or misuse of published articles. Equally, we seek to protect the reputation of the journal against malpractice. Submitted articles may be checked with duplication-checking software. Where an article, for example, is found to have plagiarised other work or included third-party copyright material without permission or with insufficient acknowledgement, or where the authorship of the article is contested, we reserve the right to take action including, but not limited to: publishing an erratum or corrigendum (correction); retracting the article; taking up the matter with the head of department or dean of the author's institution and/or relevant academic bodies or societies; or taking appropriate legal action.
3.1.2 Prior publication
If material has been previously published it is not generally acceptable for publication in a SAGE journal. However, there are certain circumstances where previously published material can be considered for publication. Please refer to the guidance on the SAGE Author Gateway or if in doubt, contact the Editor at the address given below.
Before publication, SAGE requires the author as the rights holder to sign a Journal Contributor’s Publishing Agreement. SAGE’s Journal Contributor’s Publishing Agreement is an exclusive licence agreement which means that the author retains copyright in the work but grants SAGE the sole and exclusive right and licence to publish for the full legal term of copyright. Exceptions may exist where an assignment of copyright is required or preferred by a proprietor other than SAGE. In this case copyright in the work will be assigned from the author to the society. For more information please visit the SAGE Author Gateway.
Medico-Legal Journal offers optional open access publishing via the SAGE Choice programme. For more information on Open Access publishing options at SAGE please visit SAGE Open Access. For information on funding body compliance, and depositing your article in repositories, please visit SAGE’s Author Archiving and Re-Use Guidelines and Publishing Policies.
The preferred format for your manuscript is Word. LaTeX files are also accepted. Word and (La)Tex templates are available on the Manuscript Submission Guidelines page of our Author Gateway.
For guidance on the preparation of illustrations, pictures and graphs in electronic format, please visit SAGE’s Manuscript Submission Guidelines.
Figures supplied in colour will appear in colour online regardless of whether or not these illustrations are reproduced in colour in the printed version. For specifically requested colour reproduction in print, you will receive information regarding the costs from SAGE after receipt of your accepted article.
This journal is able to host additional materials online (e.g. datasets, podcasts, videos, images etc) alongside the full-text of the article. For more information please refer to our guidelines on submitting supplemental files.
Medico-Legal Journal adheres to the SAGE Vancouver reference style. View the SAGE Vancouver guidelines to ensure your manuscript conforms to this reference style.
Only essential references should be included. Authors are responsible for verifying them against the original source material. References should be identified in the text by superscript Arabic numerals after any punctuation, and numbered and listed at the end of the paper in the order in which they are first cited in the text. Automatic numbering should be avoided. References should include the names and initials of up to six authors. If there are more than six authors, only the first three should be named, followed byet al. Publications for which no author is apparent may be attributed to the organisation from which they originate. Simply omit the name of the author for anonymous journal articles – avoid using ’Anonymous’. Punctuation in references should be kept to a minimum, as shown in the following examples:
1. Young S, Gudjonsson GH, Needham-Bennett H, Chick K, et al. Service audit of a forensic rehabilitation ward. Med Sci Law 2009;49:291-7
2. Baron DN, McKenzie Clarke H, eds. Units, Symbols, and Abbreviations. A Guide for Authors and Editors in Medicine and Related Sciences. 6th edn. London: Royal Society of Medicine Press, 2008
3. Snowden P. Regional secure units and forensic services in England and Wales. In: Bluglass R, Bowden P, eds.Principles and Practice of Forensic Psychiatry. Edinburgh: Churchill Livingstone, 1990:1375-86
4. Milliken C, D’Souza G. Ventricular septal defect. http://emedicine.medscape.com/article/162692-overview (last checked 11 June 2009)
Manuscripts must be submitted using double line-spaced, unjustified text throughout, with headings and subheadings in bold case. Press ‘Enter’ only at the end of a paragraph, list entry or heading.
The first page should contain the full title of the manuscript, a short title, the author(s) name(s) and affiliation(s), and the name, postal and email addresses of the author for correspondence, as well as a full list of declarations. The title should be concise and informative, accurately indicating the content of the article. The short title should be no more than six words long.
An abstract (unstructured, continuous prose) of no more than 150 words must accompany all article types, excepting Editorials, Letters to the Editor and Book reviews.
Tables must be prepared using the Table feature of the word processor. Tables should not duplicate information given in the text, should be numbered in the order in which they are mentioned in the text, and should be given a brief title.
All figures should be numbered in the order in which they are mentioned in the text. All figures must be accompanied by a figure legend. If figures are supplied in separate files, the figure legends must all be listed at the end of the main text file.
Line drawings should be produced electronically and clearly labelled using a sans serif font such as Arial. Graphs may be supplied as Excel spreadsheets (one per sheet). Other line drawings should be supplied in a suitable vector graphic file format (e.g. .eps)
All photographic images should be submitted in camera-ready form (i.e. with all extraneous areas removed), and where necessary, magnification should be shown using a scale marker. Photographic images must be supplied at high resolution, preferably 600 dpi. Images supplied at less than 300 dpi are unsuitable for print and will delay publication. The preferred file format is .tif.
Abbreviations must be defined in full at their first mention in the text. Authors should not create new abbreviations and acronyms.
All measurements should be expressed in SI units (exception: mmHg for blood pressure).
If preparing statistical data for publication, please read the statistical guidelines.
These guidelines are designed to help authors prepare statistical data for publication and are not a substitute for the detailed guidance required to design a study or perform a statistical analysis. Each section of a scientific paper is addressed separately.
The number and source of data must be stated and conclusions which have a statistical basis must be substantiated by inclusion of pertinent descriptive statistics (mean or median, standard deviation [SD] or interquartile range, percentage coefficient of variation [%CV], 95% confidence limits, regression equations, etc.).
Experimental design, subject selection and randomization procedures should be described and analytical precision quoted when appropriate. The hypotheses to be tested by a statistical procedure must be stated and where appropriate power calculations for the sample size used should be given (it is recommended that the power is X80%). In case-control studies clearly define how cases and controls were selected and what matching has taken place.
Unnecessary precision, particularly in tables, should be avoided. Rounded figures are easier to compare and extra decimal places are rarely important. Descriptive statistics require an additional digit to those used for the raw data. Percentages should not be expressed to more than one decimal place and not be used at all for small samples.
Normally distributed data should be described using a mean, SD and/or %CV and expressed as ‘mean (SD)’ not ‘mean ± SD’. When data are not normally distributed, following demonstration by tests such as the Shapiro-Wilk test,4 then medians and interquartile ranges should be used in place of mean and SD. Skewed data can often be normalized by logarithmic transformation or a power transformation. The statistical analysis and calculation of summary statistics should be carried out on the transformed data and the summary statistics transformed back to the original scale for presentation. If a logarithmic scale is used then graphs should display non-transformed data on a logarithmic scale.
Graphs showing data of comparable magnitude should be of a similar size and design. All individual points should be displayed where possible by displacing overlapping points. Error bars showing the standard error of the mean (SEM) or interquartile range, as appropriate, can be used to aid interpretation of the data.
The results of significance tests such as Student’s and chi-squared should be presented with descriptive statistics, degrees of freedom (if appropriate) and probability P. The validity of any assumptions should be checked (e.g. conventional t-tests assume a normal distribution and equal variance for each set of data). For 2 x 2 contingency table analysis by the chi-squared test the continuity correction must be applied and for small expected frequencies Fisher’s Exact Test used. P values should be reported in fullto1or 2 significant figures, describing P values as 40.05 or NS (not significant) should be avoided. If the results are highly significant and the calculated P value from the computer is e.g. 0.000, then the use of P <_0.0005 is="is" acceptable.="acceptable." confidence="confidence" intervals="intervals" should="should" be="be" stated="stated" particularly="particularly" for="for" non-significant="non-significant" results.="results." br="br">The conventional use of statistical significance is P≤0.05. If a different significance level needs to be used then the reasons why must be clearly stated in the statistical method section.
Statistical significance should not be equated to importance and P values should not be compared between different data sets or different statistical tests. Association should not be interpreted as causation without additional evidence.
Multiple comparisons can produce spurious and misleading significance values. The primary hypothesis should always be clearly stated, and associations detected by retrospective analysis should be interpreted with caution. Whenever possible a single overall statistical test should be applied first e.g. ANOVA. If this is not significant then multiple comparisons must not be applied. If it is significant then some form of multiple range test can be applied. If a single overall test is not possible then multiple comparisons must use a Bonferroni type significance level.
With paired data the differences between individual pairs of data and the variability of the differences are more important than the individual values. Graphical representation should also show the difference between individual pairs, e.g. by plotted lines joining the paired data points.
Standard regression analysis
Standard regression analysis requires data points to be independent (repeated measurements are not independent). The independent variable should be measured without significant error, e.g. age or time, and the points should be evenly distributed over the range and have no outliers (this can be easily examined with a scatterplot). These requirements are rarely satisfied with biological data.
Method comparison using regression and correlation coefficients is inappropriate and should be performed using Altman and Bland difference plots.5 If a standard scatter plot and regression line are thought to be useful they can be given along with the Altman–Bland plot. Remember if two methods are supposed to be measuring the same thing then it is extremely likely they will be correlated so as a statistical tool correlation is not going to tell you anything new.
If you are carrying out complicated statistical analyses e.g. multivariate analysis, ROC analysis etc., then it is recommended that you seek advice from a statistician.
Authors seeking assistance with English language editing, translation, or figure and manuscript formatting to fit the journal’s specifications should consider using SAGE Language Services. Visit SAGE Language Services on our Journal Author Gateway for further information.
Before submitting your manuscript, please ensure you carefully read and adhere to all the guidelines and instructions to authors provided below. Manuscripts not conforming to these guidelines may be returned.
Potential contributors are invited to submit research articles to the Editor, Mrs Diana Brahams and Ms Eleanor Jane Turner.
All submissions must be in English.
Tables and figures may be submitted as separate files, in which case the files should be uploaded in the following order: (1) main text, including title page, abstract and references; (2) tables; (3) figures; (4) covering letter; and (5) supplementary files.
Text files must be saved in .doc or .rtf format. Other suitable formats include .tif or .jpg for photographic images (minimum 300 dpi), .xls for graphs produced in Excel, and .eps for other line drawings.
You will be asked to provide contact details and academic affiliations for all co-authors via the submission system and identify who is to be the corresponding author. These details must match what appears on your manuscript. The affiliation listed in the manuscript should be the institution where the research was conducted. If an author has moved to a new institution since completing the research, the new affiliation can be included in a manuscript note at the end of the paper. At this stage please ensure you have included all the required statements and declarations and uploaded any additional supplementary files (including reporting guidelines where relevant).
Please also ensure that you have obtained any necessary permission from copyright holders for reproducing any illustrations, tables, figures or lengthy quotations previously published elsewhere. For further information including guidance on fair dealing for criticism and review, please see the Copyright and Permissions page on the SAGE Author Gateway.
Your SAGE Production Editor will keep you informed as to your article’s progress throughout the production process. Proofs will be made available to the corresponding author via our editing portal SAGE Edit or by email, and corrections should be made directly or notified to us promptly. Authors are reminded to check their proofs carefully to confirm that all author information, including names, affiliations, sequence and contact details are correct, and that Funding and Conflict of Interest statements, if any, are accurate. Please note that if there are any changes to the author list at this stage all authors will be required to complete and sign a form authorising the change.
Online First allows final articles (completed and approved articles awaiting assignment to a future issue) to be published online prior to their inclusion in a journal issue, which significantly reduces the lead time between submission and publication. Visit the SAGE Journals help page for more details, including how to cite Online First articles.
SAGE provides authors with online access to their final article.
Publication is not the end of the process! You can help disseminate your paper and ensure it is as widely read and cited as possible. The SAGE Author Gateway has numerous resources to help you promote your work. Visit the Promote Your Article page on the Gateway for tips and advice.
Any correspondence, queries or additional requests for information on the manuscript submission process should be sent to the Medico-Legal Journal editorial office as follows:
Diana Brahams: email@example.com
Ms Eleanor Jane Turner : firstname.lastname@example.org