The Journal of Vibration and Control is a peer-reviewed journal of analytical, computational and experimental studies of vibration phenomena and their control. The scope encompasses all linear and nonlinear vibration phenomena and covers topics such as: vibration and control of structures and machinery, signal analysis, aeroelasticity, neural networks, structural control and acoustics, noise and noise control, waves in solids and fluids and shock waves. The Journal of Vibration and Control is published in association with the Society of Experimental Mechanics (SEM).
The Journal of Vibration and Control is a peer-reviewed journal of analytical, computational and experimental studies of vibration phenomena and their control. The Journal of Vibration and Control is published in association with the Society of Experimental Mechanics (SEM).
The scope of the journal encompasses all linear and nonlinear vibration phenomena occurring in the following fields:
· Mechanical · Civil · Electrical · Ocean · Environmental · Structural · Aeronautical · Control · Materials · Electromagnetic
Original contributions, review articles, tutorials and letters will be published based on analytical, computational, and experimental analyses of topics such as, but not limited to:
· Vibration and control of structures · Vibration and control of machinery · Vibration absorbers · Signal analysis · Aeroelasticity · Neural networks · Identification · Random vibrations · Structural control · Structural acoustics · Adaptive and smart structures · Noise and noise control · Waves in solids and fluids · Shock waves · Shock waves and sound abatement · Modal analysis · Anti-noise technology · Acoustics: aero, electro, medical, building, auto, aeroplane, underwater · Electromagnetic waves and shielding · Earthquake engineering
|Mehdi Ahmadian||Virginia Polytechnic Institute and State University, USA|
|Hashem Ashrafiuon||Villanova University, USA|
|Dimitris Saravanos||University of Patras, Greece|
|Valder Steffen||Federal University of Uberlândia, Brazil|
|Mohamed Trabia||University of Nevada, Las Vegas, USA|
|Ayech Benjeddou||Supméca Institute of Mechanics of Pari, France, University of Technology of Compiègne, France|
|Marco Domaneschi||Politecnico di Torino, Italy|
|Mohammad Elahinia||University of Toledo, USA|
|Alireza Farjoud||Space Exploration Technologies (SpaceX), USA|
|Tamas Insperger||Budapest University of Technology and Economics, Hungary|
|Clara M. Ionescu||Ghent University, Belgium|
|Reza N. Jazar||RMIT University, Australia|
|Jinchen (JC) Ji||University of Technology Sydney, Australia|
|Hyung-Jo Jung||KAIST, South Korea|
|Tamas Kalmar-Nagy||Mitsibushi Electric Research Laboratories, USA|
|Jeong-Hoi Koo||Miami University, USA|
|Claude-Henri Lamarque||Ecole Nationale des Travaux Publics de l'Etat, France|
|Yu Liu||Southern University of Science and Technology, China|
|Jarir Mahfoud||INSA de Lyon, France|
|Seyed N. Mahmoodi||University of Alabama, USA|
|Stefano Melzi||Politecnico di Milano, Italy|
|Antonino Morassi||University of Udine, Italy|
|Peiman Naseradinmousavi||San Diego State University, USA|
|Yi-qing NI||The Hong Kong Polytechnic University, Hong Kong|
|Hassan Ouakad||Sultan Qaboos University, Oman|
|Gyuhae Park||Chonnam National University, South Korea|
|Annamaria Pau||Sapienza University of Rome, Italy|
|Bartosz Powalka||West Pomeranian University of Technology, Poland|
|Francesc Pozo Montero||Universitat Politècnica de Catalunya, Spain|
|Hossein Rastgoftar||Villanova University, USA|
|Guiseppe Rega||University di Roma La Sapienza, Italy|
|Jose Rodellar||Universitat Poltécnica de Catalunya - BARCELONATECH, Spain|
|Emiliano Rustighi||University of Southampton, UK|
|Marcelo Savi||Universidade Federal do Rio de Janeiro, Brazil|
|Vadim Silberschmidt||Loughborough University, UK|
|Rajiv Tiwari||Indian Institute of Technology Guwahati, India|
|Hiroshi Yabuno||University of Tsukuba, Japan|
|Mohammed Younis||State University of New York at Binghamton, USA|
|Xinjie Zhang||Jilin University, China|
|Zongyu Zuo||Beihang University, China|
|Krzysztof K. Zur||Bialystok University of Technology, Poland|
|Mohamed Abdel-Rohman||Kuwait University, Kuwait|
|Khaled Asfar||Jordan University of Science and Technology, Jordan|
|Balakumar Balachandran||University of Maryland, USA|
|Dumitru Baleanu||Cankaya University, Turkey|
|Jose M. Balthazar||Universidade Estadual Paulista, Brazil|
|Amr Baz||University of Maryland, USA|
|Mohamed Belhaq||University Hassan II - Casablanca, Morocco|
|Thomas Burton||New Mexico State University, USA|
|Sara Casciati||SIART srl, Italy|
|Nabil Chalhoub||Wayne State University, USA|
|Kevin Deng||Jilin University, China|
|Regis Dufour||LaMCoS, France|
|Horst Ecker||Vienna University of Technology, Austria|
|Sami El-Borgi||Texas A&M University at Qatar, Qatar|
|Ebrahim Esmailzadeh||University of Ontario Institute of Technology, Canada|
|Rob H.B. Fey||Eindhoven University of Technology, Netherlands|
|Michael I Friswell||Swansea University, UK|
|Hany Ghoneim||Rochester Institute of Technology, USA|
|Sathya Hanagud||Georgia Institute of Technology, USA|
|Takashi Hikihara||Kyoto University, Japan|
|Norbert P Hoffmann||Imperial College London, UK|
|Qinglei Hu||Beihang University, China|
|Raouf Ibrahim||Wayne State University, USA|
|Daniel J. Inman||University of Michigan, USA|
|Nader Jalili||Northeastern University, USA|
|John L Junkins||Texas A & M University, USA|
|Hui Li||Harbin Institute of Technology, China|
|A Luo||Southern Illinois University, USA|
|Fatin F Mahmoud||Zagazig University, Egypt|
|Nuno Maia||Technical University of Lisbon, Portugal|
|Krzysztof Marchelek||Technical University of Szczecin, Poland|
|Sami F Masri||University of Southern California, USA|
|Dean T Mook||Virginia Tech, USA|
|C. 'Nat' Nataraj||Villanova University, USA|
|Akira Nishitani||Waseda University, Japan|
|Mehmet Pakdemirli||Celal Bayar University, Turkey|
|Friedrich G Pfeiffer||TU Munchen, Germany|
|Mohamad S. Qatu||Eastern Michigan University, USA|
|Richard H Rand||Cornell University, USA|
|Subhash C Sinha||Auburn University, USA|
|Jean-Jacques Sinou||Ecole Centrale de Lyon, France|
|Gabor Stepan||Technical University of Budapest, Hungary|
|Jian-Qiao Sun||University of California, USA|
|Fabrizio Vestroni||"La Sapienza" Rome University, Italy|
|Masatzugu Yoshizawa||Keio University, Japan|
Manuscript Submission Guidelines: Journal of Vibration and Control
This Journal is a member of the Committee on Publication Ethics.
Please read the guidelines below then visit the Journal’s submission site https://mc.manuscriptcentral.com/jvc to upload your manuscript. Please note that manuscripts not conforming to these guidelines may be returned.
Only manuscripts of sufficient quality that meet the aims and scope of Journal of Vibration and Control will be reviewed.
There are no fees payable to submit or publish in this journal.
As part of the submission process you will be required to warrant that you are submitting your original work, that you have the rights in the work, that you are submitting the work for first publication in the Journal and that it is not being considered for publication elsewhere and has not already been published elsewhere, and that you have obtained and can supply all necessary permissions for the reproduction of any copyright works not owned by you.
- What do we publish?
1.1 Aims & Scope
1.2 Article types
1.3 Writing your paper
- Editorial policies
2.1 Peer review policy
2.5 Declaration of conflicting interests
2.6 Reporting guidelines
2.7 Research Data
- Publishing policies
3.1 Publication ethics
3.2 Contributor's publishing agreement
3.3 Open access and author archiving
- Preparing your manuscript
4.2 Artwork, figures and other graphics
4.3 Reference style
4.4 English language editing services
- Submitting your manuscript
5.2 Information required for completing your submission
- On acceptance and publication
6.1 SAGE Production
6.2 Online First publication
6.3 Access to your published article
6.4 Promoting your article
- Further information
Before submitting your manuscript to Journal of Vibration and Control, please ensure you have read the Aims & Scope.
- Original manuscripts should include abstracts, keywords and references. Original manuscripts should be no more than 5,000 words in length and should include no more than 25 graphics in total, with no more than 15 individually numbered figures and tables.
- Review articles should include abstracts, keywords and references. Review articles should be no more than 6,000 words in length and should include no more than 25 graphics in total, with no more than 20 individually numbered figures and tables.
- Invited Review articles should include abstracts, keywords and references. Review articles should be no more than 6,000 words in length and should include no more than 25 graphics in total, with no more than 20 individually numbered figures and tables.
With all submissions to Journal of Vibration and Control, please ensure the length justifies the content.
The SAGE Author Gateway has some general advice and on how to get published, plus links to further resources.
1.3.1 Make your article discoverable
When writing up your paper, think about how you can make it discoverable. The title, keywords and abstract are key to ensuring readers find your article through search engines such as Google. For information and guidance on how best to title your article, write your abstract and select your keywords, have a look at this page on the Gateway: How to Help Readers Find Your Article Online.
SAGE does not permit the use of author-suggested (recommended) reviewers at any stage of the submission process, be that through the web-based submission system or other communication. Reviewers should be experts in their fields and should be able to provide an objective assessment of the manuscript. Our policy is that reviewers should not be assigned to a paper if:
• The reviewer is based at the same institution as any of the co-authors
• The reviewer is based at the funding body of the paper
• The author has recommended the reviewer
• The reviewer has provided a personal (e.g. Gmail/Yahoo/Hotmail) email account and an institutional email account cannot be found after performing a basic Google search (name, department and institution).
Papers should only be submitted for consideration once consent is given by all contributing authors. Those submitting papers should carefully check that all those whose work contributed to the paper are acknowledged as contributing authors.
The list of authors should include all those who can legitimately claim authorship. This is all those who:
- Made a substantial contribution to the concept or design of the work; or acquisition, analysis or interpretation of data,
- Drafted the article or revised it critically for important intellectual content,
- Approved the version to be published,
- Each author should have participated sufficiently in the work to take public responsibility for appropriate portions of the content.
Authors should meet the conditions of all of the points above. When a large, multicentre group has conducted the work, the group should identify the individuals who accept direct responsibility for the manuscript. These individuals should fully meet the criteria for authorship.
Acquisition of funding, collection of data, or general supervision of the research group alone does not constitute authorship, although all contributors who do not meet the criteria for authorship should be listed in the Acknowledgments section. Please refer to the International Committee of Medical Journal Editors (ICMJE) authorship guidelines for more information on authorship.
All contributors who do not meet the criteria for authorship should be listed in an Acknowledgements section. Examples of those who might be acknowledged include a person who provided purely technical help, or a department chair who provided only general support.
2.3.1 Third party submissions
Where an individual who is not listed as an author submits a manuscript on behalf of the author(s), a statement must be included in the Acknowledgements section of the manuscript and in the accompanying cover letter. The statements must:
- Disclose this type of editorial assistance – including the individual’s name, company and level of input
- Identify any entities that paid for this assistance
- Confirm that the listed authors have authorized the submission of their manuscript via third party and approved any statements or declarations, e.g. conflicting interests, funding, etc.
Where appropriate, SAGE reserves the right to deny consideration to manuscripts submitted by a third party rather than by the authors themselves.
2.3.2 Writing assistance
Individuals who provided writing assistance, e.g. from a specialist communications company, do not qualify as authors and so should be included in the Acknowledgements section. Authors must disclose any writing assistance – including the individual’s name, company and level of input – and identify the entity that paid for this assistance”).
It is not necessary to disclose use of language polishing services.
Any acknowledgements should appear first at the end of your article prior to your Declaration of Conflicting Interests (if applicable), any notes and your References.
Journal of Vibration and Control requires all authors to acknowledge their funding in a consistent fashion under a separate heading. Please visit the Funding Acknowledgements page on the SAGE Journal Author Gateway to confirm the format of the acknowledgment text in the event of funding, or state that: This research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.
It is the policy of Journal of Vibration and Control to require a declaration of conflicting interests from all authors enabling a statement to be carried within the paginated pages of all published articles.
Please ensure that a ‘Declaration of Conflicting Interests’ statement is included at the end of your manuscript, after any acknowledgements and prior to the references. If no conflict exists, please state that ‘The Author(s) declare(s) that there is no conflict of interest’. For guidance on conflict of interest statements, please see the ICMJE recommendations here.
The relevant EQUATOR Network reporting guidelines should be followed depending on the type of study. For example, all randomized controlled trials submitted for publication should include a completed CONSORT flow chart as a cited figure and the completed CONSORT checklist should be uploaded with your submission as a supplementary file. Systematic reviews and meta-analyses should include the completed PRISMA flow chart as a cited figure and the completed PRISMA checklist should be uploaded with your submission as a supplementary file. The EQUATOR wizard can help you identify the appropriate guideline.
Other resources can be found at NLM’s Research Reporting Guidelines and Initiatives.
The journal is committed to facilitating openness, transparency and reproducibility of research, and has the following research data sharing policy. For more information, including FAQs please visit the SAGE Research Data policy pages.
Subject to appropriate ethical and legal considerations, authors are encouraged to:
- share your research data in a relevant public data repository
- include a data availability statement linking to your data. If it is not possible to share your data, we encourage you to consider using the statement to explain why it cannot be shared.
- cite this data in your research
SAGE is committed to upholding the integrity of the academic record. We encourage authors to refer to the Committee on Publication Ethics’ International Standards for Authors and view the Publication Ethics page on the SAGE Author Gateway.
Journal of Vibration and Control and SAGE take issues of copyright infringement, plagiarism or other breaches of best practice in publication very seriously. We seek to protect the rights of our authors and we always investigate claims of plagiarism or misuse of published articles. Equally, we seek to protect the reputation of the journal against malpractice. Submitted articles may be checked with duplication-checking software. Where an article, for example, is found to have plagiarised other work or included third-party copyright material without permission or with insufficient acknowledgement, or where the authorship of the article is contested, we reserve the right to take action including, but not limited to: publishing an erratum or corrigendum (correction); retracting the article; taking up the matter with the head of department or dean of the author's institution and/or relevant academic bodies or societies; or taking appropriate legal action.
3.1.2 Prior publication
If material has been previously published it is not generally acceptable for publication in a SAGE journal. However, there are certain circumstances where previously published material can be considered for publication. Please refer to the guidance on the SAGE Author Gateway or if in doubt, contact the Editor at the address given below.
Before publication, SAGE requires the author as the rights holder to sign a Journal Contributor’s Publishing Agreement. SAGE’s Journal Contributor’s Publishing Agreement is an exclusive licence agreement which means that the author retains copyright in the work but grants SAGE the sole and exclusive right and licence to publish for the full legal term of copyright. Exceptions may exist where an assignment of copyright is required or preferred by a proprietor other than SAGE. In this case copyright in the work will be assigned from the author to the society. For more information please visit the SAGE Author Gateway.
Journal of Vibration and Control offers optional open access publishing via the SAGE Choice programme. For more information on Open Access publishing options at SAGE please visit SAGE Open Access. For information on funding body compliance, and depositing your article in repositories, please visit SAGE’s Author Archiving and Re-Use Guidelines and Publishing Policies.
The preferred format for your manuscript is Word.
This journal does not accept two-part (or multi-part) submissions. All submissions should be complete.
LaTeX files are also accepted. Word and (La)Tex templates are available on the Manuscript Submission Guidelines page of our Author Gateway.
Uploading a LaTex document: If you are uploading a LaTex document you will need to complete these steps:
1. Always upload the main LaTeX file first.
2. Upload all supporting files. ALL style sheets, reference files, bibliography files, etc, that are referred to in the main .TEX file and select "Tex/Latex Suppl File".
3. If any changes are made to the main LaTeX document after all of the supporting files have been uploaded, all files will have to be removed and re-uploaded.
4. We recommend that all image files be one of the following file types: .gif .jpg .png .ps .eps
Please check the pdf file created by the system if you are uploading Latex files. If you experience issues with your PDF generating from LaTeX files please upload your manuscript as a PDF document (our recommended software is Overleaf) and upload your LaTeX files as supplementary material.
For guidance on the preparation of illustrations, pictures and graphs in electronic format, please visit SAGE’s Manuscript Submission Guidelines.
Figures supplied in colour will appear in colour online regardless of whether or not these illustrations are reproduced in colour in the printed version. For specifically requested colour reproduction in print, you will receive information regarding the costs from SAGE after receipt of your accepted article.
Journal of Vibration and Control adheres to the SAGE Harvard reference style. View the SAGE Harvard guidelines to ensure your manuscript conforms to this reference style.
Authors seeking assistance with English language editing, translation, or figure and manuscript formatting to fit the journal’s specifications should consider using SAGE Language Services. Visit SAGE Language Services on our Journal Author Gateway for further information.
Journal of Vibration and Control is hosted on SAGE Track, a web based online submission and peer review system powered by ScholarOne™ Manuscripts. Visit http://mc.manuscriptcentral.com/jvc to login and submit your article online.
IMPORTANT: Please check whether you already have an account in the system before trying to create a new one. If you have reviewed or authored for the journal in the past year it is likely that you will have had an account created. For further guidance on submitting your manuscript online please visit ScholarOne Online Help.
As part of our commitment to ensuring an ethical, transparent and fair peer review process SAGE is a supporting member of ORCID, the Open Researcher and Contributor ID. ORCID provides a unique and persistent digital identifier that distinguishes researchers from every other researcher, even those who share the same name, and, through integration in key research workflows such as manuscript and grant submission, supports automated linkages between researchers and their professional activities, ensuring that their work is recognized.
The collection of ORCID iDs from corresponding authors is now part of the submission process of this journal. If you already have an ORCID iD you will be asked to associate that to your submission during the online submission process. We also strongly encourage all co-authors to link their ORCID ID to their accounts in our online peer review platforms. It takes seconds to do: click the link when prompted, sign into your ORCID account and our systems are automatically updated. Your ORCID iD will become part of your accepted publication’s metadata, making your work attributable to you and only you. Your ORCID iD is published with your article so that fellow researchers reading your work can link to your ORCID profile and from there link to your other publications.
You will be asked to provide contact details and academic affiliations for all co-authors via the submission system and identify who is to be the corresponding author. These details must match what appears on your manuscript. At this stage please ensure you have included all the required statements and declarations and uploaded any additional supplementary files (including reporting guidelines where relevant).
Please also ensure that you have obtained any necessary permission from copyright holders for reproducing any illustrations, tables, figures or lengthy quotations previously published elsewhere. For further information including guidance on fair dealing for criticism and review, please see the Copyright and Permissions page on the SAGE Author Gateway.
Your SAGE Production Editor will keep you informed as to your article’s progress throughout the production process. Proofs will be sent by PDF to the corresponding author and should be returned promptly. Authors are reminded to check their proofs carefully to confirm that all author information, including names, affiliations, sequence and contact details are correct, and that Funding and Conflict of Interest statements, if any, are accurate. Please note that if there are any changes to the author list at this stage all authors will be required to complete and sign a form authorising the change.
Online First allows final articles (completed and approved articles awaiting assignment to a future issue) to be published online prior to their inclusion in a journal issue, which significantly reduces the lead time between submission and publication. Visit the SAGE Journals help page for more details, including how to cite Online First articles.
SAGE provides authors with online access to their final article.
Publication is not the end of the process! You can help disseminate your paper and ensure it is as widely read and cited as possible. The SAGE Author Gateway has numerous resources to help you promote your work. Visit the Promote Your Article page on the Gateway for tips and advice.
Any correspondence, queries or additional requests for information on the manuscript submission process should be sent to the Journal of Vibration and Control editorial office as follows: