- Indexed using Clarivate Analytics, Clarivate Analytics: Emerging Sources Citation Index (ESCI), SCOPUS, EBSCO and ProQuest
International Journal of Spray and Combustion Dynamics is a peer-reviewed journal on fundamental and applied research in combustion and spray dynamics.
Fundamental topics include advances in understanding unsteady combustion, combustion instability and noise, flame-acoustic interaction and its active and passive control, duct acoustics, blow out and flash back, deflagration and detonations, droplet and spray dynamics and combustion, atomisation, droplet and spray-acoustic interactions.
Applied topics include all aspects of combustion instabilities in solid and liquid rocket motors and gas turbine combustors, combustion noise, pulse detonation engines, active control of combustion instabilities and active control of sprays. As well as original contributions, state of the art reviews and surveys will be published.
Subtopics include, among others, experimental diagnostics of combustion dynamics, computational combustion including RANS and LES for the study of combustion dynamics, unsteady fluid mechanics, mixing, system identification and low order modelling of dynamic phenomena, role of coherent structures in combustion dynamics, flame response measurements and calculation, non-normality and nonlinearity in flame acoustic interaction, analytical acoustics, liquid sheet break-up and stability, active control of sprays, experimental diagnostics of sprays, modelling of spray break-up phenomena, two phase flow modelling and spray and droplet combustion.
|Dr Andrea Giusti||Imperial College London, UK|
|John Abraham||Purdue University, USA|
|Alain Berlemont||CNRS - CORIA, France|
|Michael Brear||University of Melbourne, Australia|
|Hua-Shu Dou||Zhejiang Sci-Tech University, China|
|Derek Dunn-Rankin||University of California, Irvine, USA|
|Osamu Fujita||Hokkaido University, Japan|
|George Gogos||University of Nebraska - Lincoln, USA|
|Barry Greenberg||Technion – Israel Institute of Technology, Israel|
|Ashwani K. Gupta||University of Maryland, USA|
|Yannis Hardalupas||Imperial College London, UK|
|Maria Heckl||Keele University, UK|
|Matthew P. Juniper||University of Cambridge, UK|
|Kazhikathra Kailasanath||Naval Research Laboratory, USA|
|Jim B. W. Kok||University of Twente, Netherlands|
|K. N. Lakshmisha||Indian Institute of Science, India|
|Chris Lawn||Queen Mary University of London, UK|
|Tim Lieuwen||Georgia Institute of Technology, USA|
|Kun Luo||Zhejiang University, China|
|Franck Nicoud||University of Montpellier 2, France|
|Mahesh V. Panchagnula||Indian Institute of Technology Madras, India|
|Jeong Park||Pukyong National University, Korea|
|Prof. Wolfgang Polifke||TU Munich, Germany|
|Bruno Schuermans||General Electric, Switzerland|
|Thierry Schuller||Université Toulouse 3 - Paul Sabatier, France|
|Shankar Subramaniam||Iowa State University, USA|
|R. I. Sujith||IIT Madras, India|
|Christian Willert||German Aerospace Center, Germany|
|Kenneth Yu||University of Maryland, USA|
|Vladimir E. Zarko||Russian Academy of Science, Russia|
|Min Zhu||Tsinghua University, China|
Manuscript Submission Guidelines: International Journal of Spray and Combustion Dynamics
This Journal is a member of the Committee on Publication Ethics
Please read the guidelines below then visit International Journal of Spray and Combustion Dynamics submission site https://mc.manuscriptcentral.com/ijscd to upload your manuscript. Please note that manuscripts not conforming to these guidelines may be returned. Remember you can log in to the submission site at any time to check on the progress of your paper through the peer review process.
Only manuscripts of sufficient quality that meet the aims and scope of International Journal of Spray and Combustion Dynamics will be reviewed.
There are no fees payable to submit or publish in this journal.
As part of the submission process you will be required to warrant that you are submitting your original work, that you have the rights in the work, and that you have obtained and can supply all necessary permissions for the reproduction of any copyright works not owned by you, that you are submitting the work for first publication in International Journal of Spray and Combustion Dynamics and that it is not being considered for publication elsewhere and has not already been published elsewhere. Please see our guidelines on prior publication and note that International Journal of Spray and Combustion Dynamics may accept submissions of papers that have been posted on pre-print servers; please alert the Editorial Office when submitting (contact details are at the end of these guidelines) and include the DOI for the preprint in the designated field in the manuscript submission system. Authors should not post an updated version of their paper on the preprint server while it is being peer reviewed for possible publication in International Journal of Spray and Combustion Dynamics. If the article is accepted for publication, the author may re-use their work according to International Journal of Spray and Combustion Dynamics author archiving policy.
If your paper is accepted, you must include a link on your preprint to the final version of your paper.
If you have any questions about publishing with SAGE, please visit the SAGE Journal Solutions Portal.
- What do we publish?
1.1 Aims & Scope
1.2 Article Types
1.3 Writing your paper
- Editorial policies
2.1 Peer Review Policy
2.5 Declaration of conflicting interests
2.6 Research Data
- Publishing policies
3.1 Publication ethics
3.2 Contributor's publishing agreement
3.3 Open access and author archiving
- Preparing your manuscript
4.2 Artwork, figures and other graphics
4.3 Supplementary material
4.4 Reference style
4.5 English language editing services
- Submitting your manuscript
5.2 Information required for completing your submission
- On acceptance and publication
6.1 SAGE Production
6.2 Online First publication
6.3 Access to your published article
6.4 Promoting your article
- Further information
7.1 Appealing the publication decision
Before submitting your manuscript to International Journal of Spray and Combustion Dynamics, please ensure you have read the Aims & Scope.
Original Research Article
Manuscripts should not normally exceed 10,000 words. The main body of the paper is to be preceded by an abstract of less than 150 words, as well as a list of 4 to 8 keywords.
Note regarding abstracts and posters presented at conferences: IJSCD will consider articles based on abstracts and posters presented at conferences, though authors should inform the Editor and acknowledge the first source of publication. Articles that have been presented at a conference but not published by the conference organizers will also be considered, provided that the author retains all the rights in the work.
The journal editor will consider the article for publication if it has been substantially revised, expanded and rewritten so that it is significantly different from the conference paper or presentation on which it is based. The article must be sufficiently different to make it a new, original work. As a guide, you should aim to have more than 50% new material. This is a matter of judgement and will be based on a comparison of the submitted article with the original conference paper.
At the time of submission, the author should confirm that they have not granted the conference organizers a licence to the work, or cleared any necessary permissions with the copyright owners, and supply the original conference paper for the purpose of comparison with the expanded article.
The SAGE Author Gateway has some general advice and on how to get published, plus links to further resources.
1.3.1 Make your article discoverable
When writing up your paper, think about how you can make it discoverable. The title, keywords and abstract are key to ensuring readers find your article through search engines such as Google. For information and guidance on how best to title your article, write your abstract and select your keywords, have a look at this page on the Gateway: How to Help Readers Find Your Article Online.
Following a preliminary triage to eliminate submissions unsuitable for International Journal of Spray and Combustion Dynamics all papers are sent out for review. The covering letter is important. To help the Editor in his preliminary evaluation, please indicate why you think the paper suitable for publication. If your paper should be considered for fast-track publication, please explain why. The journal’s policy is to have manuscripts reviewed by two expert reviewers.
International Journal of Spray and Combustion Dynamics operates a conventional single-anonymize reviewing policy in which the reviewer’s name is always concealed from the submitting author.
Each manuscript is reviewed by at least two referees. All manuscripts are reviewed as rapidly as possible, and an editorial decision is generally reached within 6-8 weeks of submission. Reviewers make comments to the author and recommendations to the Editor-in-Chief who then makes the final decision.
As part of the submission process you will be asked to provide the names of two peers who could be called upon to review your manuscript.
Recommended reviewers should be experts in their fields and should be able to provide an objective assessment of the manuscript. Please be aware of any conflicts of interest when recommending reviewers. Examples of conflicts of interest include (but are not limited to) the below:
- The reviewer should have no prior knowledge of your submission.
- The reviewer should not have recently collaborated with any of the authors.
- Reviewer nominees from the same institution as any of the authors are not permitted.
Please note that the Editors are not obliged to invite any recommended/opposed reviewers to assess your manuscript.
Papers should only be submitted for consideration once consent is given by all contributing authors. Those submitting papers should carefully check that all those whose work contributed to the paper are acknowledged as contributing authors.
The list of authors should include all those who can legitimately claim authorship. This is all those who:
- Made a substantial contribution to the concept or design of the work; or acquisition, analysis or interpretation of data,
- Drafted the article or revised it critically for important intellectual content,
- Approved the version to be published,
- Each author should have participated sufficiently in the work to take public responsibility for appropriate portions of the content.
Authors should meet the conditions of all of the points above. When a large, multicentre group has conducted the work, the group should identify the individuals who accept direct responsibility for the manuscript. These individuals should fully meet the criteria for authorship.
Acquisition of funding, collection of data, or general supervision of the research group alone does not constitute authorship, although all contributors who do not meet the criteria for authorship should be listed in the Acknowledgments section. Please refer to the International Committee of Medical Journal Editors (ICMJE) authorship guidelines for more information on authorship.
All contributors who do not meet the criteria for authorship should be listed in an Acknowledgements section. Examples of those who might be acknowledged include a person who provided purely technical help, or a department chair who provided only general support.
2.3.1 Third party submissions
Where an individual who is not listed as an author submits a manuscript on behalf of the author(s), a statement must be included in the Acknowledgements section of the manuscript and in the accompanying cover letter. The statements must:
- Disclose this type of editorial assistance – including the individual’s name, company and level of input
- Identify any entities that paid for this assistance
- Confirm that the listed authors have authorized the submission of their manuscript via third party and approved any statements or declarations, e.g. conflicting interests, funding, etc.
Where appropriate, SAGE reserves the right to deny consideration to manuscripts submitted by a third party rather than by the authors themselves.
2.3.2 Writing assistance
Individuals who provided writing assistance, e.g. from a specialist communications company, do not qualify as authors and so should be included in the Acknowledgements section. Authors must disclose any writing assistance – including the individual’s name, company and level of input – and identify the entity that paid for this assistance”).
It is not necessary to disclose use of language polishing services.
Any acknowledgements should appear first at the end of your article prior to your Declaration of Conflicting Interests (if applicable), any notes and your References.
International Journal of Spray and Combustion Dynamics requires all authors to acknowledge their funding in a consistent fashion under a separate heading. Please visit the Funding Acknowledgements page on the SAGE Journal Author Gateway to confirm the format of the acknowledgment text in the event of funding, or state that: This research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.
It is the policy of International Journal of Spray and Combustion Dynamics to require a declaration of conflicting interests from all authors enabling a statement to be carried within the paginated pages of all published articles.
Please ensure that a ‘Declaration of Conflicting Interests’ statement is included at the end of your manuscript, after any acknowledgements and prior to the references. If no conflict exists, please state that ‘The Author(s) declare(s) that there is no conflict of interest’.
For guidance on conflict of interest statements, please see the ICMJE recommendations.
The journal is committed to facilitating openness, transparency and reproducibility of research, and has the following research data sharing policy. For more information, including FAQs please visit the SAGE Research Data policy pages.
Subject to appropriate ethical and legal considerations, authors are encouraged to:
- share your research data in a relevant public data repository
- include a data availability statement linking to your data. If it is not possible to share your data, we encourage you to consider using the statement to explain why it cannot be shared.
- cite this data in your research
SAGE is committed to upholding the integrity of the academic record. We encourage authors to refer to the Committee on Publication Ethics’ International Standards for Authors and view the Publication Ethics page on the SAGE Author Gateway.
International Journal of Spray and Combustion Dynamics and SAGE take issues of copyright infringement, plagiarism or other breaches of best practice in publication very seriously. We seek to protect the rights of our authors and we always investigate claims of plagiarism or misuse of published articles. Equally, we seek to protect the reputation of the journal against malpractice. Submitted articles may be checked with duplication-checking software. Where an article, for example, is found to have plagiarized other work or included third-party copyright material without permission or with insufficient acknowledgement, or where the authorship of the article is contested, we reserve the right to take action including, but not limited to: publishing an erratum or corrigendum (correction); retracting the article; taking up the matter with the head of department or dean of the author's institution and/or relevant academic bodies or societies; or taking appropriate legal action.
3.1.2 Prior publication
If material has been previously published it is not generally acceptable for publication in a SAGE journal. However, there are certain circumstances where previously published material can be considered for publication. Please refer to the guidance on the SAGE Author Gateway or if in doubt, contact the Editor at the address given below.
Before publication, SAGE requires the author as the rights holder to sign a Journal Contributor’s Publishing Agreement. SAGE’s Journal Contributor’s Publishing Agreement is an exclusive licence agreement which means that the author retains copyright in the work but grants SAGE the sole and exclusive right and licence to publish for the full legal term of copyright. Exceptions may exist where an assignment of copyright is required or preferred by a proprietor other than SAGE. In this case copyright in the work will be assigned from the author to the society. For more information please visit the SAGE Author Gateway.
International Journal of Spray and Combustion Dynamics offers optional open access publishing via the SAGE Choice programme. For more information please visit the SAGE Choice website. For information on funding body compliance, and depositing your article in repositories, please visit SAGE Publishing Policies on our Journal Author Gateway.
The preferred format for your manuscript is Word. LaTeX files are also accepted. Word and (La)Tex templates are available on the Manuscript Submission Guidelines page of our Author Gateway.
For guidance on the preparation of illustrations, pictures and graphs in electronic format, please visit SAGE’s Manuscript Submission Guidelines.
Figures supplied in color will appear in color online.
This journal is able to host additional materials online (e.g. datasets, podcasts, videos, images etc) alongside the full-text of the article. For more information please refer to our guidelines on submitting supplementary files.
4.4 Reference style
International Journal of Spray and Combustion Dynamics adheres to the SAGE Vancouver reference style. Please review the guidelines on SAGE Vancouver to ensure your manuscript conforms to this reference style.
Authors seeking assistance with English language editing, translation, or figure and manuscript formatting to fit the journal’s specifications should consider using SAGE Language Services. Visit SAGE Language Services on our Journal Author Gateway for further information.
International Journal of Spray and Combustion Dynamics is hosted on SAGE Track, a web based online submission and peer review system powered by ScholarOne™ Manuscripts. Visit https://mc.manuscriptcentral.com/ijscd to login and submit your article online.
IMPORTANT: Please check whether you already have an account in the system before trying to create a new one. If you have reviewed or authored for the journal in the past year it is likely that you will have had an account created. For further guidance on submitting your manuscript online please visit ScholarOne Online Help.
As part of our commitment to ensuring an ethical, transparent and fair peer review process SAGE is a supporting member of ORCID, the Open Researcher and Contributor ID. ORCID provides a persistent digital identifier that distinguishes researchers from every other researcher and, through integration in key research workflows such as manuscript and grant submission, supports automated linkages between researchers and their professional activities ensuring that their work is recognised.
The collection of ORCID IDs from corresponding authors is now part of the submission process of this journal. If you already have an ORCID ID you will be asked to associate that to your submission during the online submission process. We also strongly encourage all co-authors to link their ORCID ID to their accounts in our online peer review platforms. It takes seconds to do: click the link when prompted, sign into your ORCID account and our systems are automatically updated. Your ORCID ID will become part of your accepted publication’s metadata, making your work attributable to you and only you. Your ORCID ID is published with your article so that fellow researchers reading your work can link to your ORCID profile and from there link to your other publications.
You will be asked to provide contact details and academic affiliations for all co-authors via the submission system and identify who is to be the corresponding author. These details must match what appears on your manuscript. At this stage please ensure you have included all the required statements and declarations and uploaded any additional supplementary files (including reporting guidelines where relevant).
Please also ensure that you have obtained any necessary permission from copyright holders for reproducing any illustrations, tables, figures or lengthy quotations previously published elsewhere. For further information including guidance on fair dealing for criticism and review, please see the Copyright and Permissions page on the SAGE Author Gateway.
If your paper is accepted for publication after peer review, you will first be asked to complete the contributor’s publishing agreement. Once your manuscript files have been check for SAGE Production, the corresponding author will be asked to pay the article processing charge (APC) via a payment link. Once the APC has been processed, your article will be prepared for publication and can appear online within an average of 20 working days. Please note that no production work will occur on your paper until the APC has been received.
Your SAGE Production Editor will keep you informed as to your article’s progress throughout the production process. Proofs will be sent by PDF to the corresponding author and should be returned promptly. Authors are reminded to check their proofs carefully to confirm that all author information, including names, affiliations, sequence and contact details are correct, and that Funding and Conflict of Interest statements, if any, are accurate. Please note that if there are any changes to the author list at this stage all authors will be required to complete and sign a form authorising the change.
Online First allows final articles (completed and approved articles awaiting assignment to a future issue) to be published online prior to their inclusion in a journal issue, which significantly reduces the lead time between submission and publication. Visit the SAGE Journals help page for more details, including how to cite Online First articles.
SAGE provides authors with online access to their final article.
Publication is not the end of the process! You can help disseminate your paper and ensure it is as widely read and cited as possible. The SAGE Author Gateway has numerous resources to help you promote your work. Visit the Promote Your Article page on the Gateway for tips and advice.
Any correspondence, queries or additional requests for information on the manuscript submission process should be sent to the International Journal of Spray and Combustion Dynamics:
Dr. Andrea Giusti (Editor-in-Chief), Imperial College London, UK
Editors have very broad discretion in determining whether an article is an appropriate fit for their journal. Many manuscripts are declined with a very general statement of the rejection decision. These decisions are not eligible for formal appeal unless the author believes the decision to reject the manuscript was based on an error in the review of the article, in which case the author may appeal the decision by providing the Editor with a detailed written description of the error they believe occurred.
If an author believes the decision regarding their manuscript was affected by a publication ethics breach, the author may contact the publisher with a detailed written description of their concern, and information supporting the concern, at firstname.lastname@example.org